Steel target disclaimer

Version: September 11, 2026

Utah Backyard Ballistics Disclaimer

From the Manufacturer:

Style/Measurements – 7” x 12” x 3/8” IDPA

Style/Measurements – 6” x 3/8” Gong

Thickness - .38 inches

All targets are raw and unfinished.

Safety Information:

Arranging your targets: Place the target away from buildings and other objects you wish to keep free from debris. The target will deflect debris from projectiles impacting it. Keep this in mind when choosing a location to place a target. The target must have a proper backstop behind it to stop misplaced shots. Always consider what is beyond the target and place it in a safe direction.

Caution: Bullet fragments may travel towards the shooter. All people in the area must wear ear and eye protection. Bullet fragments may cause harm to shooters, spectators and objects near the target.

Use steel targets at your own risk. Shooting at steel targets can be dangerous and caution must be taken to ensure safety.

MINIMUM SHOOTING DISTANCES FOR AR500 STEEL TARGETS: These are only suggestions, and we accept no liability for improper use.

3/8” AR500 steel targets work great for the following calibers

223, 5.56, 5.45 x 39, 7.62 x 39, and 308. For velocities over 3000 fps muzzle velocity use at 200 yards minimum. Handguns should be used no closer than 10 yards and rifles 100 yards.

.30-30 – 100 yards

7.62, .308, .30-06 – 150 yards

.270 Win, .223, 5.56 – 200 yards

Do not use XM-855 Green Tip, M193 or steel core while shooting at steel targets as it can be dangerous and will also void your warranty as it can be easily identified as being shot with these projectiles.

When using a rifle, the added distances are for the protection of the target and the safety of the shooter. Impact velocities approaching 3000 fps can cause slight pitting and edge chipping of the target surface even with AR500 Steels.

ROTATE YOUR TARGETS TO EXTEND THEIR LIFE

All our targets are built to allow for ease of reversal. Rotating or reversing your targets will result in safer targets and longer life. As targets are shot at the target, the surface expands ever so slightly, this can cause your targets to bow slightly and possibly “pit”. You will want to rotate your targets at regular intervals.